How to Start an MGA in the UK: The Technology Decisions That Matter

·

How to start an MGA in the UK: the technology decisions that matter, from launch to year three

To start an MGA in the UK you need four things: a specialist underwriting proposition, capacity from an insurer or Lloyd's syndicate, FCA permission (your own or as an appointed representative) and systems that can quote, bind, administer and report on every policy. Technology is the part founders most often leave too late.

This guide is for founders and underwriting teams planning a new managing general agent in the UK. If you need the basics first, start with what an MGA is. Here we cover the UK steps in the order they usually happen, then spend most of the guide on the technology: what you need on day one, a three-year roadmap of what to add as the book grows, and the ten mistakes that cost new MGAs time and money. Every regulatory point comes from the FCA Handbook, legislation or Lloyd's own requirements, referenced at the end.

The short answer

  1. Define the proposition: the class of business, the target market and why brokers or customers will choose you.
  2. Secure capacity from an insurer, a Lloyd's syndicate or a fronting arrangement, under a binding authority.
  3. Get FCA permission, directly or as an appointed representative, and Lloyd's coverholder approval if your capacity comes from Lloyd's.
  4. Choose and configure your platform while capacity and authorisation are being agreed, not after.
  5. Launch one product well, then add products, capacity providers, claims and channels on the same platform.

What you need before you start

An MGA underwrites on behalf of insurers, so before a capacity provider or the FCA takes you seriously you need to show that you can write the business profitably and run it properly. The UK market is busy: the Managing General Agents' Association reported 270 MGA members in its 2026 annual report, up from 249 a year earlier,1 and says its MGA members together underwrite more than £18.5bn of gross written premium.2

  • A specialist proposition. A defined class of business and a reason you can underwrite it better than the market does today: expertise, data, a distribution relationship or a product nobody else offers.
  • An underwriting track record. Lloyd's lists past, present and forecast underwriting performance among the matters it considers when approving a coverholder, alongside governance, people and competence.3 Insurers look at the same things.
  • A business plan with distribution. Who will sell the product, how much premium you expect each year and what it costs to write and service it.
  • Funding. Enough capital to meet the FCA's threshold condition on appropriate resources and to run the business until commission income covers costs.4
  • An operating model. Who will do underwriting, policy administration, credit control, claims and compliance, and which of those you will outsource. The answer shapes the technology you need.

Securing capacity

Capacity is an insurer's agreement to carry the risks you write. The capacity provider delegates authority to you through a binding authority, which sets the classes of business you may write, the limits on each risk and in aggregate, the territories, the commission and the reporting you must send. There are three common routes.

RouteHow it worksWhat it means for your systems
Insurer capacityA UK or overseas insurer delegates authority to you directly.Bordereaux, documents and referral rules in that insurer's formats and limits.
Lloyd's syndicateA managing agent delegates authority, which makes you a Lloyd's coverholder.Reporting to the Lloyd's Coverholder Reporting Standards and policy documents that meet Lloyd's requirements.
FrontingA licensed insurer issues the policies and passes most of the risk to reinsurers who back your book.Reporting to the fronting insurer and, through it, to reinsurers.
Three routes to capacity for a new UK MGA and what each means for its systems

Capacity providers judge a new MGA on its people, its underwriting and its controls, and systems are part of that test: Lloyd's lists systems, procedures and resources for underwriting administration and claims among its approval criteria for coverholders.3 If you can show a capacity provider how you will rate risks, stay within its limits and report to it, the conversation moves faster.

The agreement also settles who holds the money. Under the FCA's client money rules, a firm may only receive premiums as agent of an insurer under a written agreement, and a binding authority usually makes the MGA the insurer's agent for premiums, claims money and refunds (CASS 5.2.2G and 5.2.3R).5 This risk transfer arrangement decides whether you need client money accounts, which shapes your finance processes and your systems.

FCA authorisation and Lloyd's coverholder routes

Which FCA permissions does an MGA need?

An MGA carries on insurance distribution, which is regulated in the UK. The FCA's perimeter guidance lists the activities that can apply to any contract of insurance: dealing as agent, arranging deals, making arrangements with a view to transactions, assisting in the administration and performance of a contract of insurance, and advising (PERG 5.2.8G).6 An MGA typically needs permission for the first four, and for advising if it gives recommendations. Handling claims on behalf of an insurer is treated differently: the FCA's guidance says that managing claims for an insurer is excluded from assisting in administration and performance (PERG 5.7.7G).7 Take advice on your exact permissions before you apply.

Your own permission or an appointed representative?

Direct authorisationAppointed representative
How it worksYou apply to the FCA through Connect and hold your own permissions.An authorised principal accepts responsibility for your activities in writing (FSMA section 39).8
TimeThe FCA must decide within six months of a complete application, or twelve if incomplete (FSMA section 55V).9The principal must notify the FCA at least 30 days before you start (SUP 12.7.1R).10
FeeMost general insurance intermediary applications fall into Category 4, which is £2,820.11Set by your agreement with the principal.
Who is responsibleYou, under the threshold conditions and the Senior Managers and Certification Regime.4The principal, which must monitor your business and review your finances at least once a year (SUP 12.6).10
SuitsMGAs that want full control and plan to grow quickly.MGAs that want to trade sooner and apply for their own permission later.
Direct FCA authorisation compared with the appointed representative route

The FCA has proposed shortening its statutory deadlines to four months for a complete application and ten for an incomplete one.12 Applications need a business plan, financial information, a wind-down plan, background on controllers and evidence of how you will meet the Consumer Duty.13

Are you a product manufacturer?

Often, yes. The FCA treats an intermediary as a manufacturer where it has a decision-making role in designing and developing a product, which it assumes where the intermediary sets essential features such as coverage, price and target market and the insurer does not substantially change them (PROD 1.4.4R).14 Manufacturers must have a written product approval process endorsed by the governing body and must identify and record fair value for each product, and co-manufacturers need a written agreement setting out how they work together (PROD 4.2).15 If you sell to retail customers, the Consumer Duty applies too.16 All of this needs product, pricing and outcome data you can report on, which is a technology requirement from the first policy.

How do you become a Lloyd's coverholder?

A coverholder is a company authorised to enter into contracts of insurance on behalf of a Lloyd's syndicate under a binding authority, and delegated underwriting makes up around 45% of Lloyd's premium income, according to Lloyd's.17 You need a managing agent to sponsor you. The managing agent or a Lloyd's broker starts the application on Lloyd's ATLAS system, and Lloyd's registers the coverholder once the managing agent has completed its due diligence and an attestation and you have signed a coverholder undertaking.18 Lloyd's considers your governance, people, systems, controls, underwriting performance, reputation, financial resources and professional indemnity cover. A Lloyd's binding authority can run for up to 36 months and must name the classes of business, premium and liability limits, territories and the reporting of premiums and paid and outstanding claims.3

Technology on day one: what you can and can't do without

A new MGA does not need every system on day one. Some things cannot wait, because without them you cannot trade, cannot stay inside your binding authority or cannot report to your capacity provider. Others can be added once the book is growing.

CapabilityDay one?Why
Product build and ratingEssentialYour question set, rates and underwriting rules, which your underwriters should be able to change without a developer.
Quote and bind with referral rulesEssentialA broker portal, customer journey or API, with rules that keep every bind inside your authority.
Policy documentsEssentialSchedules, certificates and wordings at bind, plus the Insurance Product Information Document if you sell to consumers.
Mid-term adjustments, cancellations and renewalsEssentialThese start in month one, not year one.
BordereauxEssentialRisk and premium bordereaux in each capacity provider's format, produced from the policy data.
Premium collection and commissionEssentialPayments, instalments, commission and the money flows your risk transfer agreement sets out.
Audit trailEssentialA record of every quote, referral, bind and change, for capacity providers, auditors and the FCA.
Claims handlingCan waitNot needed if a TPA or your capacity provider handles claims at first.
Advanced analyticsCan waitStart with the reports your capacity provider needs.
Your own branded front endCan waitA configurable portal will usually do for launch.
Technology a new MGA needs on day one and what can wait

The choice that matters most on day one is the platform the rest is built on. Software for MGAs should let you start with the modules you need and add claims, billing and more products later without migrating. Genasys is built this way: Policy, Claims, and Billing and Finance share one record, and an MGA can start with the policy module alone. It has more than 350 pre-configured product templates across more than 40 lines of business, and it is hosted on Microsoft Azure in the UK and South Africa.

How fast you can realistically launch

The launch takes as long as the slowest of three tracks, and they can run in parallel.

TrackWhat sets the pacePublished timescale
CapacityYour track record, business plan and the market for your classNone published
FCA authorisationCompleteness of your applicationDecision within 6 months of a complete application, 12 if incomplete
Appointed representativeThe principal's due diligenceAt least 30 days' notice to the FCA
Lloyd's coverholder approvalThe managing agent's due diligenceNone published
TechnologyRates, wordings and bordereaux agreed with the capacity providerWeeks on a configurable platform
The tracks that set the pace of an MGA launch in the UK

Technology should be the fastest track. Genasys delivered Arma Karma's policy administration platform in one week when the new MGA launched its renters' insurance, and Arma Karma built its own front end on Genasys APIs. GENRIC took a parametric product from concept to live in 50 days, ten of them configuring and deploying on Genasys. The constraint is rarely the software. It is agreeing rates with the capacity provider, finalising wordings and testing documents and bordereaux, so start the technology work while authorisation and capacity are still being agreed.

Technology by year two and beyond: a three-year roadmap

An MGA's technology needs change as the book grows. This roadmap shows what most UK MGAs need at each stage, from the months before launch to the end of year three. Your timing will depend on your growth, your capacity providers and whether you take on claims, but the order holds for most.

An MGA technology roadmap, from launch to year three

Before launch

Build the core

Choose the platform. Configure the first product, rating, referral rules, documents and payments. Agree bordereaux formats with your capacity provider and test end to end.

Year one

Trade and report

Quote and bind through a broker portal or customer journey. Run mid-term changes, renewals and credit control. Send bordereaux on time and keep a full audit trail.

Year two

Add and extend

Launch a second product or capacity provider. Take on claims authority. Open an API or partner channel. Use product and outcome data for fair value reviews.

Year three

Scale and automate

Split products across capacity providers. Add currencies or territories. Move to real-time data feeds to carriers, deeper analytics and more straight-through processing.

CapabilityBefore launchYear oneYear twoYear three
ProductsFirst product configured and testedRefine rates and rules from live dataSecond and third products, cloned from the firstNew classes, currencies or territories
CapacityOne capacity providerOne capacity providerA second provider, or a new line with the firstProducts split across several providers
DistributionBroker portal or customer journeySame, refined from feedbackAPI for aggregators or partnersEmbedded and white-label channels
Bordereaux and dataFormats agreed and testedMonthly risk and premium bordereauxClaims bordereaux addedReal-time data feeds to capacity providers
FinancePayments and commission set upInstalments, credit control, reconciliationSeveral commission structuresSeveral legal entities and currencies
ClaimsHandled by TPA or capacity providerVisibility of claims against your policiesClaims authority on the same platformWider claims authority and recoveries
Compliance and MIAudit trail, IPID and demands and needsCapacity provider reportsFair value and outcome monitoringDashboards across products and providers
What a UK MGA typically needs from its technology at each stage of its first three years

Before launch: build the core

The months before launch are for choosing the platform and configuring the first product with it: the question set, rates, referral rules that mirror your binding authority, documents, payments and the bordereaux format your capacity provider wants. Test the whole journey, from quote to bordereau, before the first live policy. Show the capacity provider the system working; it is part of their due diligence on you.

Year one: trade, service and report

In year one the work shifts from building to running. Brokers or customers quote and bind every day, mid-term adjustments and cancellations arrive from the first month, and renewals start at month eleven. Bordereaux go out on time every month, premium is collected and reconciled, and every referral and decision sits in the audit trail. Use the first months of live data to refine rates and rules, which is only quick if your own underwriters can make the change.

Year two: add products, capacity and claims

Most MGAs that have grown add a second product or a second capacity provider in year two, and many take on claims authority once they have shown their capacity providers they can underwrite. The platform needs to clone and adapt products, report separately to each capacity provider and handle claims with authority limits, payments and claims bordereaux on the same record as the policy. Year two is also when product governance reviews become routine: fair value assessments under PROD 4 need clean product, pricing and claims data. Expect more questions about oversight too: the FCA's insurance priorities for 2026 include a review of how firms oversee outsourced and delegated authority arrangements, with findings due in early 2027.19

Year three: scale and automate

By year three the MGA may be splitting products across several capacity providers, adding territories or currencies and selling through partners by API. The priority becomes automation: more straight-through processing, real-time data to capacity providers instead of monthly spreadsheets, and dashboards across every product and provider. A platform that handled one product and one capacity provider well, but cannot do this, forces a migration at the moment the business can least afford one. Genasys supports multiple carriers, co-insurers and schemes in one system, with reporting across legal entities and real-time B2B data feeds.

Common mistakes

Ten technology mistakes that cost new MGAs time and money, and what to do instead.

Ten technology mistakes new MGAs make

Choosing technology last
Founders secure capacity and authorisation first, then look for a system with weeks to go. Capacity providers want to see how you will rate, bind and report, so put the platform in the plan from the start.
Running on spreadsheets
A spreadsheet rater and manual documents work for a handful of policies. They break at volume, make bordereaux slow and error-prone and leave no reliable audit trail. Start on a platform, even for one product.
Buying for the first product only
A system that fits one product and one capacity provider can force a migration when you add the second. Check how it handles several products, several capacity providers and claims before you sign.
Buying a carrier-sized system
Suites built for large insurers bring cost and implementation time a new MGA's margins rarely support. Compare five-year cost of ownership against your premium forecast, not the length of the feature list.
Depending on the vendor for every change
If each rate change or new question needs the vendor's developers, your speed disappears and costs keep rising. Make sure your own underwriters can configure products, and see them do it in the demo.
Treating bordereaux as an afterthought
Late or inaccurate bordereaux damage a capacity relationship faster than almost anything else. Agree formats before launch and produce them from the policy data, not by rebuilding spreadsheets each month.
Weak referral rules
A bind outside your authority is a problem for your capacity provider and for you. Set referral rules that mirror each binding authority, and make sure the system records who approved what, and when.
Treating product governance as paperwork
If you are a manufacturer or co-manufacturer under PROD, you need product, pricing and outcome data to show fair value. Make sure the system captures it from the first policy, not from year two.
Underestimating finance
Premium collection, instalments, commission splits, clawbacks and reconciliation all start with the first policy. Run them in the same system as the policy and connect it to your general ledger, so nothing is keyed twice.
No plan for your data
Your policy, claims and pricing data is the value of the business. Check in the contract who owns the data and product configuration, and in what format you get them back if you ever leave.
Show References Hide References
  1. Managing General Agents' Association. MGAA Annual Report 2026. August 2026.
  2. Managing General Agents' Association. MGAA expands membership eligibility. November 2026.
  3. Lloyd's. Requirements made under the Intermediaries Byelaw, Chapter 2, paragraphs 6 and 10.
  4. FCA Handbook. COND 2: The threshold conditions.
  5. FCA Handbook. CASS 5.2: Holding money as agent of an insurance undertaking.
  6. FCA Handbook. PERG 5.2: Regulated activities related to insurance distribution.
  7. FCA Handbook. PERG 5.7: Assisting in the administration and performance of a contract of insurance.
  8. Financial Services and Markets Act 2000. Section 39: Exemption of appointed representatives.
  9. Financial Services and Markets Act 2000. Section 55V: Determination of applications.
  10. FCA Handbook. SUP 12.6: Continuing obligations of firms with appointed representatives and SUP 12.7: Notification requirements.
  11. FCA. Application fees.
  12. FCA. FCA sets faster targets for authorisations. July 2025.
  13. FCA. Apply for authorisation.
  14. FCA Handbook. PROD 1.4: Application of PROD 4.
  15. FCA Handbook. PROD 4.2: Manufacturers.
  16. FCA Handbook. PRIN 2A.1: Consumer Duty, application.
  17. Lloyd's. Delegated authorities.
  18. Lloyd's. New coverholder applications.
  19. FCA. Regulatory Priorities: Insurance. February 2026.

Frequently Asked Questions

How do I start an MGA in the UK?

Starting an MGA in the UK means putting four things in place: a specialist underwriting proposition with a target market and distribution plan, capacity from an insurer or Lloyd's syndicate under a binding authority, permission from the FCA to carry on insurance distribution, and systems to quote, bind, administer and report on every policy. Most founders start with a business plan and their underwriting track record, which capacity providers and the FCA both want to see, and then pursue capacity and authorisation in parallel. You can apply for your own FCA permission or start as an appointed representative of an authorised principal, which is quicker but means working within the principal's oversight.

If your capacity comes from Lloyd's, you also need to be approved as a coverholder, sponsored by a managing agent. You will need professional indemnity insurance, a risk transfer agreement that settles who holds premium and claims money, and a product governance process if you design products yourself, because the FCA usually treats an MGA that sets a product's essential features as a manufacturer. Choose your technology early: a capacity provider will want to see how you will rate risks, stay within its limits and report to it, and software for MGAs on a configurable platform can be ready in weeks while authorisation and capacity are still being agreed.

How long does it take to launch an MGA?

The launch takes as long as the slowest of three tracks: securing capacity, getting FCA permission and building your systems. FCA authorisation has a legal deadline: the FCA must decide a complete application within six months of receiving it, and an incomplete one within twelve months, under section 55V of the Financial Services and Markets Act. The FCA has proposed cutting these to four and ten months. Becoming an appointed representative can be quicker, because the principal only has to notify the FCA at least 30 days before you start, though it will carry out its own due diligence first.

Capacity has no published timescale and depends on your track record, your business plan and the market for your class of business, and Lloyd's does not publish a timescale for coverholder approval. Technology should be the quickest track, and it can run alongside the others. Genasys delivered Arma Karma's policy administration platform in one week, and GENRIC took a parametric product from concept to live in 50 days, ten of them configuring and deploying on Genasys. What usually takes longest on the technology side is agreeing rates with the capacity provider, finalising wordings and testing documents and bordereaux, so starting early pays off.

Do I need FCA authorisation to start an MGA?

Yes. If you carry on insurance distribution in the UK, which an MGA does, you need either your own FCA permission or to operate as an appointed representative of a firm that has one. The FCA's perimeter guidance lists the regulated activities for insurance: dealing as agent, arranging deals, making arrangements with a view to transactions, assisting in the administration and performance of a contract of insurance and advising. An MGA typically needs permission for the first four, and for advising if it gives recommendations. To be authorised you must meet the threshold conditions, including adequate resources, suitability and a viable business model, and your senior managers need approval under the Senior Managers and Certification Regime.

The appointed representative route is the main alternative. Under section 39 of the Financial Services and Markets Act, an appointed representative is exempt for the activities its principal has accepted responsibility for in writing. The principal stays responsible for you, must monitor your business and review your finances at least once a year. Many new MGAs start this way to trade sooner and apply for their own permission once the business is established. The FCA says most general insurance intermediary applications fall into fee Category 4, which is £2,820. Take specialist advice on your exact permissions, because claims handling for an insurer and premium collection are treated differently in the FCA's guidance.

How does an MGA get capacity?

An MGA gets capacity by persuading an insurer, a Lloyd's syndicate or a fronting insurer backed by reinsurers to delegate underwriting authority to it under a binding authority agreement. The agreement sets the classes of business, the limits on each risk and in aggregate, the territories, the commission and the reporting the MGA must provide. Capacity providers judge a new MGA on its underwriting track record, its people, its business plan and its controls. Lloyd's lists governance, people and competence, systems and procedures, controls, underwriting performance, reputation, financial resources and professional indemnity cover among the matters it considers when approving a coverholder.

A Lloyd's binding authority can run for up to 36 months. Many MGAs start with one capacity provider and add others as the book grows, sometimes splitting a single product across several. That has a technology consequence: your system has to keep every policy inside each provider's limits, report to each one in its own format and handle commissions across several agreements. Showing a capacity provider how your platform rates risks, refers anything outside your authority and produces bordereaux is a practical way to build confidence. Genasys produces risk, premium and claims bordereaux for each capacity provider from the same policy data.

What technology does a new MGA need?

On day one, a new MGA needs a way to build and rate its products, quote and bind them through its chosen channels, issue policy documents, handle mid-term adjustments, cancellations and renewals, produce bordereaux for each capacity provider, collect premium and pay commission, and keep an audit trail of every transaction. Referral rules that mirror the binding authority matter most, because they stop the MGA binding anything outside the limits its capacity provider has agreed. If the MGA designs its own products, it also needs the product, pricing and outcome data to meet the FCA's product governance and fair value rules.

Some things can wait. An in-house claims system is not needed if a TPA or the capacity provider handles claims, and advanced analytics and a large integration library can come later. What matters is choosing a platform that can grow with the business, so that adding claims, a second capacity provider or new distribution in year two does not mean migrating to a new system. On Genasys, Policy, Claims, and Billing and Finance share one record and can be added in stages, there are more than 350 pre-configured product templates across more than 40 lines of business, and pricing is usually based on the gross written premium processed through the platform, with an initial setup cost and then a monthly licence fee. See how it works as software for MGAs.

Launching an MGA?

Genasys is cloud-based software for MGAs: product build, rating, quote and bind, documents, payments and bordereaux your own underwriters can configure, ready while capacity and authorisation are being agreed.

New MGAs

Delegated Authority